Built for demanding work at height, this full body construction harness combines fall arrest protection with an integrated padded work positioning belt. It provides front and rear fall arrest attachment points, side D-rings for positioning, quick release buckles and adjustable webbing for a secure, practical fit across construction, maintenance and access applications.
The harness is suited to construction and maintenance work, scaffolding, roofing, ladder work, elevated work platforms, tower work, warehouse applications and confined space rescue where the selected system and attachment method are appropriate.
Key features
- Full body fall arrest harness with padded waist belt
- Permanent upright rear dorsal D-ring for fall arrest
- Front chest attachment point for fall arrest
- Two large side D-rings for work positioning and pole strap attachment
- Quick release buckle connections for efficient fitting and removal
- Adjustable shoulder, chest and leg straps
- 44 mm polyester webbing
- Web keepers and elastic loops help retain excess strap after adjustment
- Suspension trauma straps included
- Padded work positioning belt with mesh padding for comfort and air circulation
- Certified to AS/NZS 1891.1:2007
Specifications
-
Brand: Austlift
-
Model / SKU: 915005
-
Harness type: Full body construction and work positioning harness
-
Size: Standard M to 2XL
-
Maximum user weight: 140 kg including clothing, tools and equipment
-
Harness weight: 2.30 kg
-
Webbing: 44 mm polyester
-
Fall arrest attachment points: Dorsal and sternal
-
Work positioning attachment: Side D-rings / pole strap waist attachment
-
Dorsal D-ring: Stamped alloy steel with polymer sleeve, 23 kN MBS, proof load tested
-
Side D-rings: Stamped alloy steel with polymer sleeve, 23 kN MBS, proof load tested
-
Chest D-ring: Forged alloy steel, 23 kN MBS, proof load tested
-
Quick release buckle: Stamped alloy steel, 15 kN MBS
-
Standard: AS/NZS 1891.1:2007 Industrial fall-arrest systems and devices
Safety and correct use
Height safety equipment must be selected, fitted, inspected and used by competent persons in accordance with the applicable workplace procedures, manufacturer instructions and relevant Australian Standards. Only attachment points identified for fall arrest are to be used for fall arrest. Side positioning points are not fall arrest points. Inspect the harness before and after use and remove it from service if there is any doubt about its condition. A suitable rescue plan must be in place before work at height begins.
