Micron Sharp-Edge Self-Retracting Lifeline (SRL) 2m

The Micron 2 m sharp-edge self-retracting lifeline (SRL) keeps webbing under tension to reduce slack during work at height. Choose from four swivel-hook configurations, each equipped with a load indicator.

Key Features

• Retracting 2 m webbing with integrated textile energy absorber
• Vertical and horizontal use, including foot-level anchorage rated to Fall Factor 2
• Sharp-edge rating: R > 0.5 mm
• 360° swivel top anchor connection and twin-pawl braking mechanism
• High-impact, load-bearing polymer housing
• Compatible with the Austlift 915600 Twin Connector for twin-SRL applications

Technical Specifications

• Maximum user weight: 140 kg including tools and PPE
• Minimum breaking strength: 15 kN
• Working length: 2 m
• Supplier-listed unit-weight range: 0.86–1.74 kg ± 0.02 kg, depending on model and end connector; individual SKU weights are not specified
• Manufacturer-stated compliance: EN 360:2002 and AS 1891.3:2020 Amendment 1:2021

Connector Options

• 915345: swivel steel scaffold hook
• 915346: swivel steel hook
• 915347: swivel alloy scaffold hook
• 915348: swivel alloy hook

Typical Applications

Work at height, elevated work platforms and low-clearance tasks where the site-specific risk assessment and manufacturer’s instructions permit SRL use.

Safety and Inspection

Check fall clearance for the actual anchorage and working position. Horizontal sharp-edge use requires additional clearance for energy-absorber deployment; read the attached technical bulletin. Inspect before and after use, arrange competent-person inspections at the supplier’s recommended intervals, and remove defective or fall-loaded equipment from service. The supplier’s webbing-SRL schedule specifies disposal after five years in service. Follow the full inspection guide and manufacturer’s instructions.